Toro CM-658H-S Operator's Manual page 21

it again to the connecting link to raise it away
from the ground.
1. Connecting link
2. Safety chain mounting
point on tow vehicle
Connecting and Checking the
Lights
Machines Equipped with a Light Kit Only
1. Connect the electrical plug of the machine with
the electrical plug of the tow vehicle
Note:
The machine uses a standard 4-pin, flat
plug. If your tow vehicle has a different type
of plug, obtain an adapter from an automotive
parts store.
2. Ensure that the tow vehicle is in the N
position, engage the parking brake, and start
the engine.
3. Test the lights as follows:
A. Turn on the headlights of the tow vehicle.
The tail lights of the machine should
illuminate.
B. Press the brake pedal of the tow vehicle.
The brake lights of the machine should
illuminate.
Figure 27
3. Chain link
4. Chain
(Figure
Figure 28
EUTRAL
C. Operate each turn signal of the tow vehicle
in turn.
The corresponding turn-signal lights of the
machine should illuminate.
g020365
28).
g020828
21