ABB PST Series Installation And Commissioning Manual page 91

1SFC132003M0201
6HFRQG VHTXHQFH SDUDPHWHUV QG 6HT 3DUDP
To set parameters related to the second sequence, enter
the 2nd Seq. Param. group.
Following parameters can be adjusted:
QG 6HW ,H
Setting current.
6WDUW 5DPS Ramp time for start.
,QLW 9ROW
Initial voltage.
&XUU /LP
Current limit.
Press 6WRUH to save the selected parameter.
7KLUG VHTXHQFH SDUDPHWHUV UG 6HT 3DUDP
To set parameters related to the third sequence, enter the
3rd Seq. Param. group.
Following parameters can be adjusted:
UG 6HW ,H
Setting current.
6WDUW 5DPS Ramp time for start.
,QLW 9ROW
Initial voltage.
&XUU /LP
Current limit.
Press 6WRUH to save the selected parameter.
&KDSWHU 
6HWWLQJV DQG FRQILJXUDWLRQ
91