ABB PST Series Installation And Commissioning Manual page 89

Settings
Functional Settings
)LJXUH  6HTXHQFH VWDUW JURXS
1SFC132003M0201
  6HTXHQFH VWDUW
The sequence start function can be used for starting
Start/Stop
several motors or multiple speed motors with different
parameter sets such as individual ramp times, initial
Protections voltages, current limits etc.
Up to three individual parameter sets can be used
simultaneously.
Warnings
Faults
7KH /2&$/ &21752/ PHQX FDQ QRW EH HQWHUHG LI
Inputs
6HTXHQFH VWDUW LV VHOHFWHG
1XPEHU RI VHTXHQFHV 1R RI 6HT
Outputs
To set parameters related to a sequence start, enter the
Fieldbus
Seq Start group.
Select the required number of parameter sets for the
Seq Start
application.
The following selections are available:
No
2
3
Press 6WRUH to save/activate the selected function.
)LUVW VHTXHQFH VHWWLQJ FXUUHQW VW 6HW ,H
Set the current for the first parameter group and press
6WRUH to save the value.
This parameter will only be displayed if parameter
1R RI 6HT is set to 2 or 3.
6HFRQG VHTXHQFH VHWWLQJ FXUUHQW QG 6HW ,H
Set the current for the second parameter group.
Press 6WRUH to save the value.
This parameter will only be displayed if parameter
1R RI 6HT is set to 2 or 3.
6HWWLQJV DQG FRQILJXUDWLRQ
Sequence start is not activated.
The softstarter is in normal operation.
Two different parameter sets will be used.
Three different parameter sets will be used.
&KDSWHU 
89