ABB PST Series Installation And Commissioning Manual page 129

1SFC132003M0201
  /RFNHG URWRU SURWHFWLRQ WLPH
3DWK LQ PHQX
0HQX6(77,1*6)XQFWLRQDO 6HWWLQJV
3URWHFWLRQV/RFNHG 5RWRU/RFN 5 7LPH
This parameter makes it possible to set the delay time
from detection until activation of the protection.
It is active only if Locked rotor protection is selected.
3DUDPHWHU 'HIDXOW YDOXH 6HWWLQJ UDQJH
WH[W
Lock R 1,0 s
Time
  /RFNHG URWRU SURWHFWLRQ W\SH RI
RSHUDWLRQ
3DWK LQ PHQX
0HQX6(77,1*6)XQFWLRQDO 6HWWLQJV
3URWHFWLRQV/RFNHG 5RWRU/RFN 5 2S
This parameter makes it possible to select between three
different actions of the softstarter when the protection is
activated. It is active only if the Locked rotor protection is
selected.
Stop–M
Stop–Ind
Ind
3DUDPHWHU 'HIDXOW YDOXH 6HWWLQJ UDQJH
WH[W
Lock R Op Stop–M
0,2...10,0 s
The motor stops and a manual reset is
required before restart.
The motor stops and an automatic reset is
performed when the fault disappears
The motor continues to run but a fault indi-
cation is given.
Stop–M, Stop–A,
Ind
&KDSWHU 
)XQFWLRQV
'HVFULSWLRQ
Trip time for
locked rotor pro-
tection
'HVFULSWLRQ
Type of opera-
tion for locked
rotor protection
129