ABB PST Series Installation And Commissioning Manual page 84

&KDSWHU 
6HWWLQJV DQG FRQILJXUDWLRQ
Settings
Functional Settings
)LJXUH  ,QSXWV JURXSV
84
  ,QSXWV
To set parameters related to the programmable inputs,
enter the Inputs group.
Start/Stop
)LUVW SURJUDPPDEOH LQSXW ,Q
Protections
Select the required function for the input In0.
Press 6WRUH to save/activate the selected function.
Warnings
One of the following functions can be selected:
Faults
None
Reset
Inputs
Enable
Outputs
Fieldbus
Seq Start
Jog
DOL
Start2
Press 6WRUH to save/activate the selected function.
No specific function (not activated).
Reset of a fault or overload condition.
When In0=0 the softstarter stops
immediately.
When In0=1 the softstarter is in normal
operation.
Overrides all other inputs.
Performs a start ramp until command is
released, then the motor stops immediately.
Open/close of the by-pass contactor
(PSTB370...PSTB1050).
Start signal for 2nd parameter set-up.
1SFC132003M0201