ABB PST Series Installation And Commissioning Manual page 81

Settings
Functional Settings
)LJXUH  :DUQLQJV JURXS
1SFC132003M0201
  :DUQLQJV
Start/Stop
Protections
Warnings
Faults
Inputs
Outputs
Fieldbus
Seq Start
To set parameters related to the warnings, enter the
Warnings group:
:DUQLQJ KLJK FXUUHQW :DUQ , +LJK
Activate the warning function if required by changing to
<HV.
Press 6WRUH to save the selected operation
:DUQLQJ KLJK FXUUHQW OHYHO :D , + /HY
Set the level of the high current warning.
Available only if the function is selected.
Press 6WRUH to save the selected operation.
:DUQLQJ ORZ FXUUHQW :DUQ , /RZ
Activate the warning function if required by changing to
<HV.
Press 6WRUH to save the selected operation.
:DUQLQJ ORZ FXUUHQW OHYHO :D , / /HY
Set the level of the low current warning.
Available only if the function is selected.
Press 6WRUH to save the selected operation.
:DUQLQJ RYHUORDG :DUQ 2/
Activate the warning function if required by changing to
<HV.
Press 6WRUH to save the selected operation.
:DUQLQJ RYHUORDG OHYHO :D 2/ /HY
Set the level of the overload warning.
Available only if the function is selected.
Press 6WRUH to save the selected operation.
:DUQLQJ 6&5 RYHUORDG :DUQ 6&5 2/
Activate the warning function if required by changing to
Yes.
Press 6WRUH to save the selected operation.
&KDSWHU 
6HWWLQJV DQG FRQILJXUDWLRQ
81