Huawei CX320 User Manual page 90

CX320 Switch Module
User Guide
Step 5 Enter the number of a serial port, and press Enter.
l
l
Issue 09 (2019-08-02)
– Press Y to forcibly disconnect the existing SOL connection.
– Press N to not disconnect the existing SOL connection. The system stays at the
current screen.
The serial port CLI is displayed. On this CLI, you can perform operations such as
configuring the serial port and querying parameters of the serial port.
If another user has logged in to the serial port, a message will be displayed asking you
whether to forcibly log out the user.
– Press Y to forcibly log out the user.
– Press N to not forcibly log out the user. The system stays at the current screen.
Copyright © Huawei Technologies Co., Ltd.
6 Common Operations
84