Indicators - Huawei CX320 User Manual

CX320 Switch Module
User Guide
Table 2-4 Internal ports
Name
10GE
port
40GE
port
GE port

2.4 Indicators

This topic describes the names, meanings, colors, descriptions and working status of the
indicators on the CX320.
By observing the indicators, you can determine the current operating status of the CX320.
Table 2-5 Indicators
Label
STAT
Issue 09 (2019-08-02)
Ty Quantit Subcard
pe y Number
- 32 1 to 16
- 1 18
- 2 19
Meaning
Stacking status
indicator
Copyright © Huawei Technologies Co., Ltd.
Port Serial Description
Number
1 to 2 The ports are connected to
half-width compute node
slots 1 to 16. The subcard
numbers are consistent
with the compute node
slot numbers and range
from 1 to 16.
1 The port is used to
interconnect the switch
modules in slots 1E and
4E or in slots 2X and 3X.
1 to 2 The two GE ports are
connected to the two
MM910 management
modules respectively to
communicate with
internal ports eth0 and
eth2 of the MM910
management modules.
Color Description
Green l Off: The CX320 is not
powered on.
l Blinking green for only 10
times: The CX320 is being
powered on.
l Blinking green: The
CX320 is in standby or
slave state in a stack and is
operating properly.
l Steady green: The CX320
is in the active state in a
stack or is not stacked, and
is operating properly.
2 Product Overview
24