Backing Up The Configuration File - Huawei CX320 User Manual

CX320 Switch Module
User Guide
Configuration Type
Network Management and
Monitoring

4.9 Backing Up the Configuration File

This topic describes how to back up the configuration file. If configuration errors occur or the
CX320 is faulty, you can use the backup configuration file to restore configuration data.
Back up the configuration file of the CX320 so that the configuration data can be restored if
faults occur.
Prerequisites
Software
WinSCP.exe (third-party free software)
Procedure
Step 1 Log in to the converged switching plane command-line interface (CLI).
Step 2 Log in to the MM910 CLI.
Step 3 Configure the converged switching plane.
Step 4 Save the converged switching plane configuration file.
1.
Issue 09 (2019-08-02)
Run the following command on the CLI of the converged switching plane to view the
configuration file required for the next startup of the converged switching plane:
<HUAWEI> display startup
The command output is as follows:
MainBoard:
Configured startup system software:
Startup system software:
Next startup system software:
Startup saved-configuration file:
Next startup saved-configuration file:
Startup paf file:
Next startup paf file:
Startup patch package:
Next startup patch package:
Copyright © Huawei Technologies Co., Ltd.
Configuration Item
l SNMP Configuration
l RMON Configuration
l NETCONF Configuration
l OpenFlow Agent Configuration
l LLDP Configuration
l NQA Configuration
l Mirroring Configuration
l Packet Capture Configuration
l NetStream Configuration
l sFlow Configuration
4 Configuring the CX320
flash:/xxx.cc
flash:/xxx.cc
flash:/xxx.cc
flash:/vrpcfg.zip
flash:/vrpcfg.zip
default
default
NULL
NULL
75