Huawei CX320 User Manual page 104

CX320 Switch Module
User Guide
Figure 6-10 WinSCP login
Step 3 Set the login parameters.
The parameter descriptions are displayed as follows:
l
l
l
l
l
l
Step 4 Click Login.
The WinSCP file transfer page is displayed.
Step 5 In the left and right panes, create or delete folders, or copy folders between the left and right
panes.
----End
Issue 09 (2019-08-02)
Host name: Specifies the IP address of the device to be connected. For example:
191.100.34.32.
Port number: The default value is 22.
User name: Specifies the username. For example: admin123
Password: Specifies the password. For example: admin123
Private key file: Retain the default value None.
Protocol: Select the default value SFTP, and then select Allow SCP fallback.
NOTE
l If a key file was not selected during the first login, a warning Continue connecting and add host
key to cache is displayed. Click Yes. The WinSCP file transfer page is displayed.
l If Windows 7 is used, in the left pane of the page, open the C:\Users\Administrator\Documents
directory, the device's /root directory is opened in the right pane by default.
Copyright © Huawei Technologies Co., Ltd.
6 Common Operations
98