Huawei CX320 User Manual page 82

CX320 Switch Module
User Guide
2.
3.
4.
5.
Issue 09 (2019-08-02)
Next startup saved-configuration file indicates the configuration file for the next
startup. The displayed information indicates that the configuration file is in vrpcfg.zip
format.
NOTE
– The configuration file must be a *.zip or *.cfg file. If the configuration file is a *.dat file, this
file cannot be synchronized to the MM910.
– If the configuration file is a *.dat file, perform the following operations:
Run the save Configuration file name command to convert the configuration file into a
n
*.zip or *.cfg file.
Run the startup saved-configuration Configuration file name command to set the
n
configuration file used for the next startup to a *.zip or *.cfg file.
For details, see
Save the converged switching plane configuration file from CX320 to the MM910.
<HUAWEI> save
The command output is as follows:
Warning: The current configuration will be written to the device. Continue?
[Y/N]:Y
Now saving the current configuration to the slot 1
Info: Save the configuration successfully.
begin synchronize configuration to SMM ...
slot 1: upload configuration to SMM successfully.
<HUAWEI>
Check that the configuration file is synchronized to the MM910 successfully.
<HUAWEI> reboot
If the following information is displayed, the configuration file is successfully
synchronized.
slot 2:
Next startup system software: flash:/xxx.cc
Next startup saved-configuration file: flash:/vrpcfg.zip
Next startup paf file: default
Next startup patch package: NULL
begin synchronize configuration to SMM ...
slot 2: upload configuration to SMM successfully.
System will reboot! Continue? [Y/N]:
If a configuration file synchronization failure message is displayed, contact Huawei
technical support.
Enter N to not restart the converged switching plane.
Connect the Ethernet port on a PC to the MGMT network ports on the panels of the
active and standby MM910 over a local area network (LAN).
Copyright © Huawei Technologies Co., Ltd.
CX320 Switch Module V100R001C10 Configuration
4 Configuring the CX320
Guide.
76