Using The Cli To Collect Converged Switching Plane Information - Huawei CX320 User Manual

CX320 Switch Module
User Guide
The FTP server is configured.
----End
6.9 Using the CLI to Collect converged switching plane
Information
Scenarios
Use the CLI to collect the following information:
l
l
l
Prerequisites
Conditions
WFTPD 4.2.4.610 or later has been installed. wftpd32.exe is a cross-platform tool used to
transfer files from a PC to switch modules. This tool is a piece of third-party free software.
Obtain it yourself.
Data
Table 6-2 Data list
Parameter
IP addresses
Subnet mask
Default gateway
The default user name of a switching plane is root, and the default password is Huawei12#$.
Procedure
Step 1 Log in to the Ethernet switching plane from the CLI. For details, see
MM910 CLI Over a Network Port by Using PuTTY
or a Switch Module over
Issue 09 (2019-08-02)
Logs
Debugging information
Trap information
NOTE
You can query and set IP addresses of all modules on the MM910 WebUI. For details about how to log
in to the MM910 WebUI, see
l For MM910 earlier than (U54) 2.20, choose System Management > Network Management >
Switch Module > IP Address.
l For MM910 (U54) 2.20 or later, choose Chassis Settings > Network Settings > Switch Module.
Copyright © Huawei Technologies Co., Ltd.
Example Value
192.168.1.100
255.255.255.0
0.0.0.0
6.5 Logging In to the MM910
SOL.
6 Common Operations
WebUI.
6.2 Logging In to the
or Logging In to a Compute Node
101