CX320 Switch Module
User Guide
4.1 Configuration Overview
Configuration Process
Figure 4-1 Switch module configuration process
Table 4-1 Configuration process description
Step
Set an IP address for the
management network
port.
Log in to the CLI of each
switching plane.
Issue 09 (2019-08-02)
Description
Set the IP address for the management network port of the
converged switching plane.
You can log in to the CLI of the switching plane from a PC by
using the IP address of the management network port.
You can log in to the converged switching plane CLI over
Secure Shell (SSH), Serial Over LAN (SOL), or a serial port.
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the CX320
53