More Than One Measuring Input To On A Single Measuring Input (C230-2/C240 Only) - Siemens SIMOTION Function Manual

Measuring Input TO - Part III
5.2 Fundamentals of Measuring Input technology object
Figure 5-4
See also
Measuring input types - local and global measuring inputs (Page 131)
5.2.3.3

More than one measuring input TO on a single measuring input (C230-2/C240 only)

It is possible to assign more than one measuring input to a single measuring input (onboard
inputs C230-2/C240 (M1-M2)). In this case, however, it must be ensured that only one
measuring input is active at any one time.
Figure 5-5
5.2.3.4 Measuring one measurement event on several axes - Listening measuring input (V4.0 and
later)
With the "Monitoring measuring input" function, the measurement event of a measuring input
can also be measured simultaneously by several Measuring Input TOs. To do so, an original
136
Example of interconnection of more than one measuring input with one axis or one external
encoder
Interconnection of more than one measuring input with a single C230-2/C240 (M1-M2)
onboard input
Output Cams and Measuring Inputs
Function Manual, 04/2014