Programming/References Of To Cam Track - Siemens SIMOTION Function Manual

4.4

Programming/References of TO Cam Track

4.4.1 Programming
Figure 4-32
*1 The following commands are available in the technology object states can be activated and
active:
● _disableCamTrackSimulation
● _enableCamTrackSimulation
The simulation commands are modal/act in parallel and do not replace any existing
_enableCamTrack commands.
Output Cams and Measuring Inputs
Function Manual, 04/2014
Programming and execution model for the Cam Track TO
4.4 Programming/References of TO Cam Track
Cam Track TO - Part II
123