Mapping A Cam Track Onto An Axis - Siemens SIMOTION Function Manual

You can set the following parameters:
Field/button
Table with units
Physical variable column
Unit column
Toolbar
Close
Help
4.2.5

Mapping a cam track onto an axis

The cam track is defined independently of the axis. On activation, the cam track is mapped
onto the axis. Only then are the switching states of the output cams calculated.
Output Cams and Measuring Inputs
Function Manual, 04/2014
Meaning/instruction
Shows the physical variable. The physical variables which
are used by the TO are available for the configuration.
Displays and configures the unit. A drop-down list for
selecting the unit appears when you click on the cell.
Displays whether offline data or online data is shown
● Blue field = offline display
● Yellow field = online display
Button for closing the dialog.
Button for opening the online help for the dialog.
Cam Track TO - Part II
4.2 TO Cam Track basics
87