Smc40 Sensor Module Cabinet (Only For Direct Measuring Systems) - Siemens SINAMICS S120 Commissioning Manual

5.2.3.4

SMC40 Sensor Module Cabinet (only for direct measuring systems)

Table 5- 23 Meaning of the LEDs on the Sensor Module Cabinet-Mounted SMC40
LED Color
RDY –
READY
Green
Orange
Red
Green/red Flashing
Green/
orange
or
Red/
orange
The parameters for activating component recognition can be taken from the following reference:
1)
Reference: SINAMICS S120/S150 List Manual
Each channel has a multifunction LED.
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Status Description, cause
Off The electronics power supply is missing or outside the
permissible tolerance range.
Continuous The component is ready for operation. Cyclic DRIVE-CLiQ
light communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous This component has at least one fault.
light
Note:
LED is controlled irrespective of the corresponding mes-
sages being reconfigured.
Firmware download is complete. The system waits for
light POWER ON.
2 Hz
Flashing Component recognition via LED is activated
light
Note:
Both options depend on the LED status when component
recognition is activated.
5.2 Diagnostics using LEDs
Remedy
–
–
–
Correct and
acknowledge the fault.
Carry out a POWER
ON.
. –
1)
Diagnostics
323