Output Cam Data - Siemens SIMOTION Function Manual

Cam Track TO - Part II
4.3 Configuring the TO Cam Track
4.3.5.2

Output cam data

The defaults for system variables of single output cams on a track, e.g. starting and end
position, are displayed in the Output Cam Data tab.
Figure 4-23
You can set the following parameters:
Table 4-12 Cam track output cam data defaults
Field/Button Meaning/Note
Output cam The output cam number (0 - 31) is displayed here. Each track can have up to 32 output cams.
(camType)
Validity Select this checkbox, if you want to set the output validity of single output cams on a track. If the box
is activated, the output cam will be output, along with the track. If it is not activated, the output cam
is not output.
Starting position Enter the starting position of the output cam.
End position Enter the end position of the position-based cam here.
108
Cam track output cam data, position-based cam example
Output Cams and Measuring Inputs
Function Manual, 04/2014