Mitsubishi Electric Melsec Q Series User Manual page 68

2 USING THE E-MAIL FUNCTION
2 - 40
2) When sending data as main text
<When data format is CSV>
• Target data values are converted to 4-digit hexadecimal ASCII
codes and recorded from the higher byte (H) side of the values.
• The device name and display device No. are recorded for each
setting device.
• If multiple word data is to be processed, insert a comma between
each word (4-byte ASCII code) data.
Insert a CR (code: 0D
device range or 8-word data.
(Example) In case of M15 to M0 = 0001
W1 = 002B
For M15 to M0
M15 to M12
0 0 0 0 0
For the main text of e-mail
W0-W1 [CR+LF]
001A 002B [CR+LF]
,
D0-D9 [CR+LF]
0011 0012 0013 0014 0015 0016 0017 0018 [CR+LF]
, , , ,
[CR+LF]
0019 001A ,
M0-M79 [CR+LF]
0001 0002 0003 0004 0005 , , , ,
X10-X3F [CR+LF]
0060 0061 0062 [CR+LF] , ,
B10-B4F [CR+LF]
, , ,
0033 [CR+LF]
0031 0032
0030
The dotted boarder lines between the device values in the above figure are for
explanation purpose only. They are not actually recorded in the main text.
) and a LF (code: 0A
H
H
, ...
H
to M8 to M4
0 0 0 0 0 0 0
, , ,
[CR+LF]
MELSEC-Q/L
) for each setting
H
, M31 to M16 = 0002 , ..., W0 = 001A
H
to M0
0 0 0 1
,
H
2 - 40