Mitsubishi Electric Melsec Q Series User Manual page 205

6 DEDICATED INSTRUCTIONS
Control data
Device
Execution/abnormal
(S1) + 0
complete type
(S1) + 1 Completion status
Channel used by the local
(S1) + 2
station
Target station storage
(S1) + 3
channel
Target station network
(S1) + 4
number
6 - 38
Item
b15
1) Execution type (bit 0)
0: No arrival confirmation
When the target station is on the same network:
Completed when the data is sent from the local
station.
Execution source
When the target station is on other network:
Completed when the data arrives at the relay
station on the network of the local station.
Execution source
1: With arrival confirmation
Completed when the data is stored in the target
station's designated channel.
Complete
Target station
2) Abnormal complete type (bit 7)
Set whether or not the clock data setting is required
at abnormal completion.
0: Clock data setting not required:
Clock data at error occurrence is not stored in
(S1) + 11 to (S1) + 17.
1: Clock data setting required
Clock data at error occurrence is stored in (S1)
+ 11 to (S1) + 17.
Stores the status at the completion of the instruction.
0
Other than 0: Abnormal (error code) (
Set the channel used by the local station.
1 to 8 (channel)
Designate the target station's channel that stores data.
1 to 8 (channel)
Designate the network number of the target station.
1 to 239: Network number
254 : When 254 is designated in Jn (The network
Set data
to b7
0 2) 0
Complete
Target station
Complete
Relay station Target station
Execution source Relay station
Complete
: Normal
designated by the valid module during other
station access)
MELSEC-Q/L
Setting range
to b0
1)
0000
H
0001
H
0080
H
0081
H
Target station
—
2
)
1 to 8
1 to 8
1 to 239, 254
(Continued to the next page)
1
Set by ( )
User
System
User
User
User
6 - 38