Zp.msend - Mitsubishi Electric Melsec Q Series User Manual

6 DEDICATED INSTRUCTIONS

6.3 ZP.MSEND

Set
Internal device
data
Bit Word
(S1) —
(S2) —
(D)
[Instruction [Executing
symbol] condition]
ZP.MSEND
1 If the originating station is a Basic model QCPU (function version B or later), a Universal model QCPU, or an LCPU, " " (double
quotation) of the first argument can be omitted.
Set data
Set data
Start I/O signal of the local station's Ethernet module.
"Un"/Un
(00 to FE
(S1) Head device of the local station that stores the control data.
Head device of the local station that stores the contents of the e-mail to
(S2)
be sent ((Subject + attached file) or (Subject + main text)).
Local station device that is turned on for one scan by the completion of
(D) the instruction.
(D) + 1 is turned on if the instruction execution completes abnormally.
6 - 8
This instruction sends e-mails.
Link direct device
File register J \
Bit
Command
Description
: The higher 2 digits of the 3-digit I/O signal.)
H
The local devices and the file register for each program cannot be used as devices
used in setting data.
POINT
The MSEND instruction can be executed only when the local station is a Q/LCPU.
REMARKS
The number of steps for the MSEND instruction is 10.
Applicable device
Intelligent
function module
device U \G
Word
—
—
—
ZP.MSEND "Un"
MELSEC-Q/L
Constant
Index register Zn
K, H, $
—
—
—
(S1) (S2) (D)
1
2
Set by ( ) Data type
User String/Binary 16 bits
User, system
Device name
User
System
Others
—
—
—
Bit
6 - 8