Mitsubishi Electric Melsec Q Series User Manual page 64

2 USING THE E-MAIL FUNCTION
2 - 36
(9) Monitoring value
Designate the comparison value of the condition of comparison given in (8)
above.
(10) News data storage device
The condition device that stores the news data is set when the news condition is
satisfied.
When the CPU monitoring condition listed in (1) is "No Setting", a programming
tool automatically sets the condition device; therefore, the user does not need to
set it.
(11) News data points
Designate how many devices should be read (number of points read) from the
devices designated in (10) above.
(a) The number of device points that can be sent at a time is calculated as
follows.
Word device points
1) Designate the settings so that the total number of points satisfies the
equation above when multiple news conditions are satisfied when
monitoring multiple condition devices.
2) When multiple bit devices are to be designated, be aware of following:
• One device occupies 16 device points.
2 + bit device points  8 (round up)  1920
MELSEC-Q/L
2 - 36