Mitsubishi Electric Melsec Q Series User Manual page 62

2 USING THE E-MAIL FUNCTION
2 - 34
(2) Send method
Select the send method of the device monitoring results.
Item
Send Attached File
Send Text Mail
(3) Attached file format
Item
Binary
ASCII
CSV
(4) Attached file name
Designate the name of an attached file. If a file name is not designated, the
Ethernet module automatically names it and sends the file named mmddhhss
(month, date, hour, minute) (same as for e-mail sending).
(5) PLC inquiry interval
Designate the interval for the Ethernet module to read the CPU status and device
values from the programmable controller CPU.
The user can designate any inquiry time interval (time) within the ranges listed
below.
Time unit
Hour
Minute
Second
(6) Input format of inspection value
Select the input format (decimal/hexadecimal) of the monitoring value.
Sends data as an attached file in the file format designated in (3).
Sends data as the main text of e-mail in ASCII code format.
It is not necessary to designate items (3) and (4) when this setting is used.
Sends the attached file in binary format.
The Ethernet module sends the attached file as they are with the code
currently in use.
(Binary to ASCII conversion is not performed.)
Sends the attached file in ASCII format.
The Ethernet module converts the attached file from binary to ASCII.
Sends the attached file in CSV format.
The Ethernet module converts the attached file from binary to CSV.
Setting range (default: 5 min)
1 to 24
1 to 1440
30 to 3600
MELSEC-Q/L
Explanation
Explanation
2 - 34