Mitsubishi Electric Melsec Q Series User Manual page 160

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 27
(2) Ethernet module dedicated commands
The Ethernet module dedicated commands to be attached to the FTP operation
command "quote" are explained.
status (Ethernet module dedicated command)
[Function]
[Designation format]
stop (Ethernet module dedicated command)
[Function]
[Designation format]
[Caution]
Displays the operating information of a CPU module.
This command is to check the operating information of a CPU
module when a file is transferred to the CPU module.
When displaying the file attribute:
quote status
Either of the following is displayed as the execution result
after a successful completion:
• When the CPU module is in RUN status
: "RUN"
• When the CPU module is in STOP status
: "STOP"
• When the CPU module is in PAUSE status
: "PAUSE"
Sets a CPU module to STOP status (remote STOP).
When displaying the file attribute:
quote stop
The following is displayed as the execution result after a
successful completion:
• Displayed message: 200 Command successful
Before writing a program file of a CPU module, set the CPU
module to STOP status with this command.
MELSEC-Q/L
5 - 27