Mitsubishi Electric Melsec Q Series User Manual page 141

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 8
(2) Login to the Ethernet module
Once the Ethernet module's initial processing has completed normally, log in to
the Ethernet module.
(Example) Start FTP from MS-DOS prompt of Microsoft
1) Start FTP
2) Connect with the FTP server (open IP address of the FTP server <ret>).
3) Designate the login name
LJ71E71) <ret>).
Designate the password
LJ71E71) <ret>).
When logging in, use the FTP login name and password set on the "Ethernet
FTP parameter settings" screen for setting the login name and password.
Upon reception of the login name and password from the external device
(FTP client), the Ethernet module (FTP server) checks whether they match
with the FTP login name and password set in the FTP parameter setting area
of the buffer memory.
File transfer to the Ethernet module is allowed when the login name and
password match, and not allowed if they do not match.
(3) Remote password unlock
Changes the status of the remote password from lock to unlock if the FTP
communication port has been designated as a port subject to the password check
using the remote password setting. (quote password-unlock remote password <ret>)
POINT
If the FTP communication port has been designated as a port subject to the
password check, other commands cannot be used until the remote password
status is unlocked.
(ftp<ret>).
(login name (default value: QJ71E71 or
(password (default value: QJ71E71 or
MELSEC-Q/L
® ®
Windows
5 - 8