Mitsubishi Electric Melsec Q Series User Manual page 161

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 28
run (Ethernet module dedicated command)
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Designation example 3]
[Caution]
Sets the CPU module to the RUN status (remote RUN).
Device memory clear can be designated when setting to the
RUN status.
quote run [mode [clear mode]]
Mode: Designate whether to force a remote RUN.
0 : Normal RUN (default value)
1 : Forced RUN
Clear mode: Designate whether to clear (initialize) the CPU
module device memory when starting the remote
RUN operation.
0 : Do not clear the device (default value)
1 : Clear everything except for the latch range
2 : Clear everything including the latch range
The following message is displayed as the execution result
when completed successfully.
• Displayed message: 200 Command successful
To perform a normal remote RUN with "Do not clear the
device memory" selected.
quote run
To perform a forced remote RUN with "Do not clear device
memory" selected.
quote run 1
To perform a forced remote RUN with "Clear all device
memory except for the latch range" selected.
quote run 1 1
• The forced execution mode is only used to allow the forced
remote RUN from another device when the CPU module
cannot perform the remote RUN due to problems in the
device which issued the remote STOP for the CPU module.
When a normal RUN is designated and the system is
already set to the STOP or PAUSE status by another
device, the system is not set to the RUN status.
• Select the clear mode of the device memory upon operation
startup depending on the system configuration.
After the CPU module performs the clear operation, the
system runs according to the PLC parameter settings (PLC
File Initial Device Value).
MELSEC-Q/L
5 - 28