Mitsubishi Electric Melsec Q Series User Manual page 46

2 USING THE E-MAIL FUNCTION
Setting values for designating the
attached file transmission format
b12 b11 b10 b9
0 0 0 0
0 1 0 0
0 1 0 0
2 - 18
1 The following shows the transmission format of the attached file designated in the
control data of the MSEND instruction.
For how to select the binary format, ASCII format, and CSV format, see Section
6.3.
b12 to b8
Complete type
Format set
b8
Ethernet module
0 Binary Personal
computer/UNIX
Ethernet module
0 ASCII Personal
computer/UNIX
Personal
1 CSV
computer/UNIX
(a) Select binary format or ASCII format for communications between Ethernet
modules. To use ASCII format, set a data size (the size the MRECV
instruction receives) after conversion into ASCII within 6144 words.
The attached file of the MSEND instruction will be sent as is.
The name of the attached file is mmddhhss.bin (system date.bin).
mm: Month
(b) Designate either binary format, ASCII format or CSV format when a PC/UNIX
receives e-mail sent from an Ethernet module. The attached file of the
MSEND instruction will be sent in the designated format.
1) When binary format is designated
The name of the attached file is mmddhhss.bin (system date.bin).
mm: month
2) When ASCII format is designated
The name of the attached file is mmddhhss.asc (system date.asc).
mm: month
3) When CSV format is designated
The name of the attached file is mmddhhss.csv (system date.csv).
mm: month
For details on how to receive e-mails, see (4) on page 2-17.
The system date for the file name is the data managed by the
programmable controller of the station in which the Ethernet module
is installed.
Designate the transmission format of the attached file.
Applicable station
Sends the attached file in binary format.
(
Sends the attached file in ASCII format.
The Ethernet module converts the attached file
from binary to ASCII. (
Note that some restrictions apply to receive an
attached file in ASCII format sent with the MSEND
instruction by an Ethernet module. (Refer to (a)
below.)
Sends the attached file in CSV format.
The Ethernet module converts the attached file
from binary to CSV. (
dd: Date hh: Hour
dd: day hh: hour
dd: day hh: hour
dd: day hh: hour
MELSEC-Q/L
Description of processing
.bin)
.asc)
.csv)
ss: minute
ss: minute
ss: minute
ss: minute
2 - 18