Mitsubishi Electric Melsec Q Series User Manual page 166

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 33
passwd-rd (L series Ethernet module dedicated command)
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Designation example 3]
[Caution]
Sets the registered read password of the target file for file
transfer in the Ethernet module.
Or, display/clear the current read password set in the Ethernet
module.
Use this command only if a read password is registered in
the target file of file transfer.
The Ethernet module performs a password check when
the designated file is accessed.
quote passwd-rd [read password]
One of the following is displayed as the execution result for a
successful completion.
• When setting a read password: 200 Command successful
• When displaying a read password: 200 Read-password is
"read password"
• When clearing a read password: 200 Command successful
• When displaying a read password with the read password
not set: 200 Read-password is not set.
To set the read password (ABCD1234@efgh) to the Ethernet
module:
quote passwd-rd ABCD1234@efgh
To display the read password currently set in the Ethernet
module:
quote passwd-rd
To clear the read password currently set in the Ethernet
module:
quote passwd-rd c or quote passwd-rd C
• One read password can be set in the Ethernet module. If
the target file for file transfer changes and a password is
registered in the file which is at the changed destination, set
the read password for the new target file in the Ethernet
module again.
• Upon login to the Ethernet module, the read password set is
initialized or cleared.
MELSEC-Q/L
5 - 33