Table of Contents
Advertisement
FIRMWARE
Serves for firmware updates. Firmware update
can be downloaded from
After download, click Choose file button and
select downloaded firmware file. Click Update.
During firmware upload do not disconnect
SMΩRF from the power and LAN, do not turn it
off, and do not touch any buttons on its front
panel.
Prior firmware update it is necessary to backup
SMΩRF configuration because firmware update
may irrecoverably corrupt data and backups in
the SMΩRF memory. Proper procedure is:
Backup config
1.
Update firmware
2.
Restart SMΩRF
3.
Restore config
4.
Restart SMΩRF
5.
Config Backup/Restore function at Firmware
page is functionally equivalent to
Backup/Restore function at Configuration page.
STATUS
Shows very simple readout of active sensor's
FWD and SWR values at the TX point.
LOGOUT
Disconnects from the web server and locks
access.
Since there is a lot of variation how different
browsers work, it is possible that some function
may not work correctly. In this case we
recommend to use Mozilla Firefox which is
always tested for full functionality.
microHAM © 2015 All rights reserved
www.microham.com
67
Advertisement
Table of Contents
