microHAM SMORF Manual page 15

PK ATTACK
3.
Sets attack time used for peak values (PK).
•
Range: 0 – 200ms, Step: 1ms.
PK DECAY
4.
Sets decay time used for peak values (PK).
•
Range: 0 – 200ms, Step: 1ms.
PEAK HOLD
5.
Turns ON/OFF peak hold function. When enabled, peak value is held on its position as one segment.
•
Higher peak value resets lower peak value.
HOLD TIME
6.
Sets how long the peak segment will be lit on its position. Occurrence of higher peak value during the
•
hold will restart this time.
Range: 0 – 20s, Step: 100ms.
P-H DECAY
7.
Sets decay time for peak-hold segment.
•
Range: 0 – 20s, Step: 100ms.
EDIT POWER COLOR TABLE
8.
Defines four (4) custom power ranges and colors on per band basis.
•
Example:
BAND
160m
EDIT SWR COLOR TABLE
10.
Defines four (4) custom SWR ranges and colors on per band basis.
•
Applicable to bottom bar graph only.
Example:
BAND
160m
microHAM © 2015 All rights reserved
COLOR POWER COLOR
GRN 8W YEL
COLOR POWER COLOR
GRN 1.50 YEL
POWER COLOR
10W GRN
POWER COLOR
2.00 RED
15
POWER COLOR
40W RED
POWER COLOR
3.00 RED