Table of Contents
Advertisement
microHAM © 2015 All rights reserved
9 - MAIN MENU
As was already mentioned, SMΩRF has extensive, yet still easy to understand MENU system to get access to
various settings and parameters. MENU system has a tree structure always starting from the root MAIN MENU,
having separate branches for global settings - SYSTEM MENU, sensor related settings - SENSOR 1, 2 MENU,
alarms settings for each sensor - ALARM 1, 2 MENU and four (4) MENU items for each SCREEN: TOP LED
BAR, BOTTOM LED BAR, SCREEN MENU and TONE GENERATOR.
To enter MENU system, push and hold MENU button [11] for one second to get into the root - MAIN MENU tree.
MENU system has auto-exit, it means that to exit MENU you have to pass through any branch of the MENU tree
until MENU disappears, by brief pushes of the MENU button. Even thought MENU always starts at root MAIN
MENU screen, last path through the menu branches is remembered, by simple pushing MENU button you get
where you was last time. This is remembered even if you turn the SMΩRF off.
TOP LED BAR MENU and BOTTOM LED BAR MENU have already been explained in the BAR GRAPH
SETTINGS chapter, as well as TONE GENERATOR and SCREEN MENU in following chapters. As was
mentioned several times, these four menus set parameters which belongs to the each screen separately.
SENSOR 1/2 and ALARM 1/2 menus are menu items related to the particular sensor and they will be explained
later. Now we take a look at system menu.
10 - SYSTEM MENU
SYSTEM MENU serves to enter settings and parameters not related to individual screens or sensors but applies
to the whole SMΩRF, both SENSORs and all SCREENs. It is divided into several sub-menus.
37
Advertisement
Table of Contents
