Screens Management - microHAM SMORF Manual

microHAM © 2015 All rights reserved
SYSTEM MENU – SCREENS MANAGEMENT
SCREENS MANAGEMENT menu allows to set appearance of the each screen in the screens sequence and
copy screen's data which forms the screen (TOP/BOTTOM LED BAR, TONE GENERATOR, ALARM's table of
the SCREEN SETTINGS) from one screen to another, between sensors, copy some screen in place of another
or create a new screen from scratch based on built in template. Menu has several sub menus to simplify data
management and user interface.
SYSTEM MENU – SCREENS MANAGEMENT - SENSOR 1 SCREENS ORDER
This menu allows to set if particular screen will be shown in sequence of screens for the selected sensor and
allows to customize the NAME of the screen. Menu provides table, each row is assigned to one screen. Screen
has own editable NAME, screen template TYPE upon which is screen built, and ENABLE attribute which can be
set to YES or NO. When attribute is set to YES, screen is included in screens sequence accessed by SCREEN
← and → buttons.
SENSOR 2 SCREENS ORDER menu does
the same as SENSOR 1 SCREEN ORDER
but for the SENSOR 2 instead of
SENSOR 1.
TWO SENSORS SCREENS ORDER menu
does again the same but for two sensors
screens, when the SMΩRF is switched to the
DUAL mode, therefore these menu items will
not be described separately.
47