Antenna Cables; Copy Settings - microHAM SMORF Manual

In situations where both sensors are connected to similar or same setups like SO2R, it is useful to clone
customized settings from one sensor to another in order to save a lot of duplicate adjustments. This menu allows
to copy selected sensor's data from the SENSOR 1 to the SENSOR 2.
If this menu is accessed from the root SENSOR 2 MENU, it will copy SENSOR's 2 data to SENSOR 1.
CONTROLS:
1. DATA
Sets data going to be copied.
HiPWR ALARMS
LoPWR ALARMS
SWR ALARMS
PSK ALARMS
ARCING ALARMS
ALARM SETTINGS
ALL ALARMS
100% LEVELS
MISCELLANEOUS
SENSOR CABLES

ANTENNA CABLES

ALL SETTINGS
COPY
2.
Select and push the EDIT button to confirm copy.
microHAM © 2015 All rights reserved
SENSOR 1 MENU – COPY SETTINGS
– copies High Power Alarms
– copies Low Power Alarms
– copies SWR Alarms
– copies PSK Alarms
– copies Arcing Alarms
– copies Alarm Settings
– copies all Alarms and Alarm Settings
– copies 100% Power Levels Table
– copies Miscellaneous Settings
– copies Sensors Cables Table
– copies Antenna Cables Table and Assignment
– copies all above settings at once
55