Table of Contents
Advertisement
UP1500 User's Manual
4.2.5
Booting the Operating System
UP1500 800-A1
date [<yyymmddhhmm.ss>]
Example 4-7 Date Command
>>>date
2:51:27
Jan 21, 2001
>>>date
200101210829.00
>>>date
8:29:02
Jan 21, 2001
The boot command is used to boot the operating system.
Example 4-8 Boot Command
>>> b dka200
(boot dka200.2.0.7.1 -flags 0,0)
block 0 of dka200.2.0.7.1 is a valid boot block
reading 893 blocks from dka200.2.0.7.1
bootstrap code read in
base = 1fa000, image_start = 0, image_bytes = 6fa00
initializing HWRPB at 2000
initializing page table at 1fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
The boot command initializes the processor, loads a program image from the
specified boot device, and transfers control to that image. The syntax is:
boot [-file filename] [-flags [value]] [-halt]
[-protocols enet_protocol] [boot_dev]
Table 4-6
Boot Command Options
Option
-file filename
-flags [value]
Notes: *The operator console is the monitor, keyboard, and mouse. This hardware is used to
enter SRM Console commands into the system.
Description
The boot file.
Specifies additional information to the loaded image
or operating system.This qualifier overrides the
setting of the boot_osflags environment
variable. See the boot_osflags environment
variable on page 4-17 for a list of settings and their
meanings.
Chapter 4 Software Support
4-11
Advertisement
Table of Contents
