UP1500 User's Manual
3.3
Enclosure Requirements
3.4
Physical Parameters
3.4.1
UP1500 Parameters
3.4.2
UP1500 Mounting Hole Specification
UP1500 800-A1
This product has been approved for use in the Axxion Group ATX Case, DL-17.
Refer to section 3.5, "Rear Panel I/O Shield," on page 3-7 for additional details on
enclosure requirements.
The UP1500 is a PCB with the dimensions specified in Table 3-5.
Table 3-5
UP1500 Physical Parameters
Dimension
Length
Width
Height
The UP1500 mounting hole specification is depicted in Figure 3-2. This mounting
hold specification is an standard ATX implementation, which allows the UP1500
to fit into standard ATX chassis.
Chapter 3 Electrical, Environmental and Physical Data
Value
304.8 mm (12 in)
243.8 mm (9.6 in)
65 mm (2.6 in)
3-6