Table of Contents
Advertisement
UP1500 User's Manual
4.2.3
Displaying the System Configurations
show config
UP1500 800-A1
Table 4-3
Special Characters for SRM Console (Continued)
Character
Ctrl/O
Ctrl/Q
Ctrl/R
Ctrl/S
Ctrl/U
*
" "
#
Several commands are used to display the system configuration:
!
show config
!
show cpu
!
show device
!
show memory
!
show pal
!
show version
The show config command displays a list of devices found on the system
interconnect and I/O buses. This is the configuration at the most recent
initialization. The syntax is:
show config
Example 4-1 Show Config Command
>>>show config
Stops output to the SRM Console terminal for the
current command. Toggles between enable and
disable. The output can be reenabled by other
means as well: when the SRM Console prompts
for a command, issues an error message, or enters
program mode, or when Ctrl/P is entered.
Resumes output to the SRM Console terminal that
was suspended by Ctrl/S.
Redisplays the current line. Deleted characters
are omitted. This command is useful for hardcopy
terminals.
Suspends output to the SRM Console terminal until
Ctrl/Q is entered. Cleared by Ctrl/C.
Deletes the current line.
Wildcarding for commands such as show.
Double quotes enable you to denote a string for
environment variable assignment.
Specifies that all text between it and the end of the
line is a comment. Control characters are not
considered part of a comment.
Chapter 4 Software Support
Function
4-6
Advertisement
Table of Contents
