Samsung UP1500 800-A1 User Manual page 11

UP1500 User's Manual
Conventions and Definitions
Typographic Conventions
Acronyms
UP1500 800-A1
Chapter 2, "System Configuration," provides a pictorial layout of the UP1500
!
with its key components. Configuration elements include main memory
guidelines, I/O disk port cabling, and non-keyed I/O connections.
Chapter 3, "Electrical, Environmental and Physical Data," furnishes the
!
electrical and environmental requirements, and physical board dimensions.
Chapter 4, "Software Support," describes the three major software
!
components that form the UP1500 user interface. Topics include the Alpha
System Reference Manual (SRM) Console and Fail Safe Booter (FSB)
firmware, and procedures describing installation and upgrade of the Linux
operating system.
Chapter 5, "Troubleshooting," discusses solutions for hardware and software
!
problems encountered during system startup.
! Appendix A, "Connectors and Pinouts," describes the connectors and pinouts
used on the UP1500.
Appendix B, "Support, Products and Documentation," provides directions for
!
obtaining additional product information and technical support.
This section defines product-specific terminology, abbreviations, and other
conventions used throughout this manual.
This manual uses the following type conventions:
Variable information and document titles appear in italic type.
!
! Text that you type is shown in bold Courier font.
Type that appears on a screen, such as an example of computer output, is
!
shown in Courier font.
Two key names joined with a forward slash are simultaneous keystrokes.
!
Press down the first key while you type the second key, as in press Ctrl/S.
The following is a list of the acronyms used in this document and their definitions.
Preface
x