Setting The System Date - Samsung UP1500 800-A1 User Manual

UP1500 User's Manual
show memory
show pal
show version
4.2.4

Setting the System Date

UP1500 800-A1
The show memory command displays information about each memory bank:
slot number, size in megabytes, and the starting address. The syntax is:
show memory
Example 4-4 Show Memory Command
>>>show memory
Array # Size
------- --------
0 128 MB
1 128 MB
2 128 MB
Total Bad Pages = 0
Total Good Memory = 384 MBytes
The show pal command displays the versions of PALcode. PALcode is written
to support Alpha processors. It implements architecturally defined processor
behavior. The syntax is:
show pal
Example 4-5 Show PAL Command
>>>show pal
pal
V1.62-1
The show version command displays the version of the SRM Console
program that is installed on the system. The syntax is:
show version
Example 4-6 Show Version Command
>>>show version
version
The date command is used to either display or set the system time and date.
The syntax is:
Base Addr Description
--------- ----------------------------------
000000000 128 x 1 DDR Registered 72 bits ECC
008000000 128 x 1 DDR Registered 72 bits ECC
010000000 128 x 1 DDR Registered 72 bits ECC
OpenVMS PALcode V1.69-54, Tru64 UNIX PALcode
A5.6-15 Jan 21 2001 08:29:00
Chapter 4 Software Support
4-10