Ew*0_Protocols Options - Samsung UP1500 800-A1 User Manual

UP1500 User's Manual
ew*0_protocols
kbd_hardware_type
language
UP1500 800-A1
Enables network protocols for booting and other functions. The syntax is:
set ew*0_protocols protocol_value
The options for protocol_value are show in Table 4-11.
Table 4-12 ew*0_protocols Options
Option
mop
bootp (default)
bootp, mop
Used only on systems with the language variant 3C (Français), this environment
variable sets the keyboard hardware type as either PCXAL or LK411 and enables
the system to interpret the terminal keyboard layout correctly.
Whenever you change the value of kbd_hardware_type, you must reset the
system by pressing the Reset button or issuing the initialize command.
The syntax is:
set kbd_hardware_type keyboard_type
The options for keyboard_type are:
pcxal (default)
lk411
Specifies the keyboard layout, which is language dependent. The setting of the
language environment variable must match the language of the keyboard
variant.
Whenever you change the value of language, you must reset the system by
pressing the Reset button or issuing the initialize command.
Sets the network protocol to mop (Maintenance
Operations Protocol), the setting typically used
with the Linux operating system.
Sets the network protocol to bootp, the setting
typically used with the Linux operating system.
When both are listed, the system attempts to use
the mop protocol first, regardless of which is
listed first. If not successful, it then attempts the
bootp protocol.
Selects the default keyboard hardware type.
Selects the LK411 keyboard layout for use with language
variant 3C (Français).
Chapter 4 Software Support
Description
4-19