Using Environment Variables - Samsung UP1500 800-A1 User Manual

UP1500 User's Manual
4.2.7

Using Environment Variables

UP1500 800-A1
Option firmware files were not found on CD or floppy.
If you want to load the options firmware,
please enter the device on which the files are located(ewa0),
or just hit <return> to proceed with a standard console update:
dva0
Please enter the name of the options firmware files list, or
Hit <return> to use the default filename (up1500fw.txt)
Copying up1500fw.txt from dva0. . .
Copying albasrm.rom from dva0. . .
***** Loadable Firmware Update Utility *****
---------------------------------------------------------------
Function Description
---------------------------------------------------------------
Display Displays the system's configuration table.
Exit Done exit LFU (reset).
List Lists the device, revision, firmware name, and update
revision.
Readme Lists important release information.
Update Replaces current firmware with loadable data image.
Verify Compares loadable and hardware images.
? or Help Scrolls this function table.
---------------------------------------------------------------
UPD> list
Device Current Revision
srm
UPD> update
Confirm update on:
srm
[Y/(N)]y
WARNING: updates may take several minutes to complete for each
device.
srm Updating to 5.6-15...
UPD>
Note: Refer to section 4.3, "FSB," on page 4-24 for information on updating
SRM Console firmware using the FSB.
Environment variables pass configuration information between the SRM Console
and the operating system. Their settings determine how the system powers up,
Filename
5.6-14 srm_fw
DO NOT ABORT!
Chapter 4 Software Support
Update Revision
Verifying 5.6-15...
:
5.6-15
PASSED.
4-13