System Requirements; Software Requirements; Hardware Requirements; Board Components - Samsung S3FM02G User Manual

S3FM02G_USER'S GUIDE_REV 1.00

1.3 System Requirements

This section describes the hardware and software system requirements

1.3.1 Software Requirements


Windows NT version 4.0 , Window 95 or higher for using Multi-ICE, the debugger

1.3.2 Hardware Requirements


S3FM02G EVB Board set

Main EVB board

Power to supply DC 7 to 12V (recommend:12V)

For running the Multi-ICE server:

200MHz Pentium PC

32MB RAM for Windows95, or 64MB RAM for Windows NT

Parallel Port

1.4 Board Components

The board consists of:

32-bit RISC ARM CortexTM-M3 Core : Micro controller – S3FM02G
o
ETM function embedded with ARM CortexTM-M3
o
SWD (Serial Wire Debug) and JTAG Debugging Solution

Memory:
Serial EEPROM: SSP8 (8 Kbytes  8-bit) , SSP16 (4 Kbytes  16-bit), IIC (16 Kbytes  8-bit)
o

Serial communication lines:
o
2 CAN (IOS 11898): 9 pin D-sub (male)
o
1 ENC: 15 pin D-sub (female)
o
2 UART (RS-232): 9 pin D-sub (female)
o
2 LIN (ISO 9141): 3 pin Terminal Block (CCP3.5)
o
1 RS-485: 3pin Terminal Block (CCP3.5)

Function blocks interfaces:
o
1 Buzzer
o
6 LED (Power(2), Port signal(4) )
o
6 Switch (Power, RESET, Wake up(4) )
o
Jumper & Header pin (each Blocks)
1-3
1 S3FM02G DESCRIPTION