Table of Contents
Advertisement
UP1500 User's Manual
UP1500 800-A1
Table 4-1
Summary of SRM Console Commands (Continued)
Command
show device
show memory
show pal
show version
stop
Table 4-2
Syntax for SRM Console Commands
Option
Length
Case
Abbreviation
Options
Numbers
Displays a list of controllers and their devices in the
system.
Displays memory module information.
Displays the version of the privileged architecture
library code (PALcode).
Displays the version of the SRM Console
program.
Halts the processor. (Same as halt.)
Attribute or Action
Up to 255 characters, not including the
terminating carriage return or any characters
deleted as the command is entered. A command
longer than 80 characters and without the
backslash character (see Table 4-3) causes display
of an error message.
Upper- or lowercase characters can be used for input.
Characters are displayed in the case in which they are
entered.
Only by dropping characters from the end of
words. You must enter the minimum number of
characters to identify the keyword
unambiguously. Abbreviation of environment
variables is allowed with the show command.
You can use command options, to modify the
environment, after the command keyword or after
any symbol or number in the command. See
individual command descriptions for examples.
Most numbers in SRM Console commands are in
decimal notation. Two exceptions, both of which
use hexadecimal notation, are addresses and
numbers used in the deposit command. The
default radic can be overridden by inserting %d
before the numbers you want to express in
decimal, %o before octal, or %x before
hexadecimal. Register names (for example, R0)
are not considered numbers and use decimal
notation.
Chapter 4 Software Support
Function
4-4
Advertisement
Table of Contents
