UP1500 User's Manual
Chapter 2
2.1
Board Layout and Components
UP1500 800-A1
System Configuration
This chapter describes the layout and configuration of the UP1500. It includes
information about switch settings used to determine the UP1500 configuration.
On-board connectors are provided for the following:
AGP and PCI cards
!
!
IDE and FDD devices
USB devices
!
Memory DIMMs
!
Serial and parallel peripherals
!
LAN (Ethernet) port
!
!
Audio In/Out and Mic In connections
Power
!
These connectors and the configuration switchpack are shown in Figure 2-1,
which depicts the UP1500 and its components. Table 2-1 specifies the
components as indicated in Figure 2-1.
Refer to Appendix A for a complete description of the connectors and pinouts
used in the UP1500.
Chapter 2 System Configuration
2-1