Siemens Sinumerik 840D sl Function Manual page 307

05.07
Display graphic
Graphics, such as graphical information for the workpiece machining, can be
displayed via the Display graphic softkey.
Fig. 4-7: Display of a graphic in the detail view
Note
Graphics can only be displayed with PCU and access via network drives (not in
conjunction with FTP protocol).
All graphic types that are supported by the Internet Explorer can be displayed
(e.g. BMP, JPG). Further graphic types can be displayed when the appropriate
plug-ins are installed. The graphic types must be entered in the configuration user
interface.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
FBDN2/4-25