DNC Plant/DNC Cell (FBDN1)
10 Configuration
10.8.3 Description of the 2nd section of the List Editor
Fig. 10-28: Right-hand section of the List Editor (2nd section)
Choosing the column
In the Column combination field, you specify which items of administrative data for
the NC data you want to display in the list display and which column is currently
being edited.
You can also choose the column (date of administration modification) using your
mouse in the preview.
Index
The number after the index indicates the position of this column in the list display.
Using the arrow buttons, you can move the column further forwards or
backwards.
Width
In this field, you can enter the width of the column to specify how it is to appear in
the list in all languages. You can also set the width directly in the preview using
your mouse. You are, however, advised to check the width because you can set it
more accurately using the mouse. You can do this by entering the width again,
selecting a different field with your mouse, and watching the field in question while
you do this.
FBDN1/10-230
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07