05.07
4.2.3 NC data transfer (with change of target, name, type)
Fig. 4-2: Downloading NC data to a selectable target of the SINUMERIK (a workpiece
directory in this case)
General
The following can be performed during the transfer with this function (Transfer to
softkey):
The name of the target file can be changed.
The type of the target file and the target directory can be changed.
The NC file can be stored in a workpiece directory.
Changing of the workpiece name in the target system.
The NC data can be downloaded to the file system and also directly into the NCK
as with the standard download.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
FBDN2/4-19