Fig. 10-31: Screen Editor Preview - Siemens Sinumerik 840D sl Function Manual

05.07

Fig. 10-31: Screen Editor preview

3rd section: Preview of the screen display set in the defaults.
Note
Changes to the screen display do not take effect until the next time DNC is
started. Any changes made take effect immediately in DNC Admin.
Not all of the available languages are shown in the Screen Editor; not only does
this ensure clarity, but it is also rarely the case that all languages supported by
DNC are used in one plant.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-233