Siemens Sinumerik 840D sl Function Manual page 299

05.07
Selection of the hierarchy level of the plant topology in DNC
In the DNC Cell/Plant archive, the NC data can be stored in several hierarchy
levels (group, subgroup, machine, etc.) depending on the plant topology. You can
navigate on these hierarchy levels with the relevant vertical softkeys and display
the NC data of this hierarchy level and the ones above.
The hierarchy affiliation of the NC data in the plant topology of DNC Cell/Plant is
documented in the * column. The following assignment applies:
Table 4-1 Assignment of the NC data in the DNC plant topology
* column
*
**
Source
In the upper area of the screen, NC data is displayed in the form of a tabular list
view, which is available on the higher-level DNC Cell/Plant for the SINUMERIK.
The list displays all the available NC data and workpiece directories of DNC in
alphabetical order.
Table 4-2 Identifiers of the DNC data management in DNC IFC SINUMERIK
Identifiers
Target
The standard download target is displayed in the lower part of the screen.
Depending on the configuration of DNC IFC SINUMERIK, the download is
performed:

With the Transfer softkey (target in file system)
or

With the Transfer & load softkey directly into the NCK (target in NCK).
Except for workpieces and pseudo workpieces, the target path results from the NC
data type.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
Description
Machine
Group
Higher-level group
Description
Symbol for NC data
Symbol for workpieces / pseudo workpieces
4 Functions
FBDN2/4-17