Siemens Sinumerik 840D sl Function Manual page 128

DNC Plant/DNC Cell (FBDN1)
5 User administration
Adding or changing a filter assignment
You can create one or several new filter assignments by choosing New. You can
change the selected filter assignment and create one or more new filter
assignments by choosing Change.
The following settings need to be made:

Select filter name
A list of users that can use this filter is then displayed. This list can be
restricted to a small number of users depending on the restriction criteria set
when the filter was configured. (See also: "Creating or changing filters").

Assign users
The relevant checkbox must be activated for each user to whom this filter is to
be assigned.

Choose application(s)
After you have chosen at least one application (DNC IFC SINUMERIK, DNC or
DNC Admin) for which the selected filter is to be assigned to the selected
users, you have to choose an entry in the combo box.
DNC / DNC Admin
In the Station Name combo box in DNC and DNC Admin, an empty combo
box means that the filter assignment applies to all stations. If you specify a
particular station, however, the filter assignment applies to this station only.
DNC IFC SINUMERIK
If you select a group for DNC IFC SINUMERIK, a filter assignment is created
or an existing filter assignment changed for all the SINUMERIK* machines
under this group.

Accept data
Using the Accept button, you can create filter assignments or change existing
ones.
Note
Only one filter assignment can be defined per user, application (DNC IFC
SINUMERIK, DNC and DNC Admin), machine or station. This means that if a
filter assignment already exists, and a new one is nevertheless defined, the old
filter assignment will be replaced by the new one. This is carried out
automatically.
FBDN1/5-120
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07