Fig. 10-5: Template Selection For Serial Transmission Without Protocol - Siemens Sinumerik 840D sl Function Manual

05.07
If several template files of the selected machine type are in the ...config/template
directory, clicking the Edit or Config Dialog button opens a dialog for the template
selection, which contains all the template files available in the ...config/template
directory. Different template files are already available for controller types from
other manufacturers.

Fig. 10-5: Template selection for serial transmission without protocol

Note
The dialog for selecting the template is only displayed if the template directory
contains more than one template file for the machine type in question.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-167